Fast and Cheap Bathroom Renovations

Return to site

Fast and Cheap Bathroom Renovations

· Bathroom Remodel,Bathroom Renovation,Plumbing,Flooring,Showers

Quick Home Improvements To Your Design That Make A Difference

Refreshing your home's look and feel shouldn't cost you a fortune. One of the most coveted remodels in the home improvement space is a bathroom renovation. While you can see a great return on your investment with a backyard remodel or a kitchen renovation, one of the unique things about bathrooms is that they can be done fairly inexpensively without disrupting your living space.

If you think your bathroom could use a boost, you’ve got company. Bathrooms are among the rooms most likely to be renovated in a home, according to the Home Improvement Research Institute. Homeowners spend about $4,900 on home makeovers during the first year they own their homes, while about 60 percent feel their bathrooms are “inadequate.”

Quick Bathroom Remodel Tips

The good news is that there are ways to make over your bathroom without spending a lot of money on remodeling costs and without replacing old fixtures. Try these tips:

Clean Start

You may be able to save yourself the cost of replacing worn-looking toilets, bathtubs or sinks with a good cleaning. Built-up soap scum, hard-water stains, rust, calcium and lime can dull the look of a bathroom and make it seem older than it actually is.

Try using a powerful cleaner designed for tough bathroom stains, such as Kaboom Ultra Scrub, to give your bathroom surfaces an instant makeover. Ultra Scrub’s thick cream clings to surfaces and its scrubbing granules get deep into textured surfaces to remove grime and stains, without scratching. Stay on top of your bathroom’s appearance using maintenance products such as Kaboom NeverScrub Continuous Toilet Cleaning System. It allows you to throw away your brush and never scrub your toilet again.

Splash Of Color

Use mildew-resistant, latex paint to add new color to the bathroom. Be sure to use a bin primer over any water stains or spots before starting the job, and pay careful attention to detail-areas, such as woodwork or trim around mirrors.

Home designers often say the bathroom is a good place to experiment with colors. If your home has more muted tones, consider using bright hues in the bathroom to help make the room seem cleaner and brighter.

Finally, add some decoration to the bathroom to make it seem less stark and more comfortable. You may want to hang some family photos on the wall or a framed picture or two. Just be sure not to make the bathroom appear too cluttered. Remember, if you have limited space, home designers say less is more.

Things You Need To Know About Shower Replacement

Gone are the days when bathrooms were cramped, no-frills spaces with a simple toilet, sink and standard-size tub/shower combination. Today’s homeowners want spa-like bathrooms that offer beauty as well as function. One of the emerging trends is the stand-alone shower enclosure with crystal-clear glass that shows off the elegant fixtures and rich materials of the shower, such as marble, soapstone and granite.

Unfortunately, many people don’t realize that ordinary glass is porous. When hard water, soap and even household cleaners are combined with the heat and humidity typical of shower environments, glass can corrode and no amount of scrubbing will remove the staining and scale that result.

One remedy that homeowners can turn to is spray-on or wipe-on treatments to protect the glass. But when these coatings wear off, staining, streaking and corrosion can occur. Another solution, ShowerGuard™ glass from Guardian Industries, uses a patented ion beam technology to permanently seal the surface of the glass during manufacturing. With this new product, there is never a need to reapply the protection and the appearance can be maintained with a soft cloth or wet sponge and most common household cleaners.

If you’re in the market for a shower enclosure, here are tips on what to ask the bath dealer or the professionals handling your remodeling project:

• Is the shower glass protected? First, ask if the surface of the shower glass has a sealant or other protective treatment. Standard glass can become streaked and stained quickly.

• When and how is the sealant applied? If the shower glass is protected, find out what type of sealant is used and when it is applied. Some glass coatings are applied after the glass is manufactured, which could result in their wearing off in a relatively short period of time.

• Are there special cleaners that must be used? Some glass treatments require special cleaners and techniques rather than ordinary household cleaners.

• How long will the protection last? Some spray-on or wipe-on glass treatments can cease to protect the glass after two or three years and reapplication can be messy.

Durable Flooring Choices

Slate tile stone flooring is flexible in nature and can be used almost anywhere. People have been using it extensively in kitchen, front hallway, bathroom and outdoor uses such as pool surrounds and patio. One of the most brilliant features of this stone is that it has got naturally slip-resistant surfaces. The tile is also widely known for its durability and decorative nature.

The slate stone can be seen in large deposits in coastal regions. Some ancient oceans have gathered silt and many other mineral elements in these areas. The silt left behind is exposed to pressure and heat to give it a shape of rugged and durable stone. This stone is widely known as slate. There are several minerals found in slate including quartz, mica and chlorite. These minerals make slate stress resistant. This slate is found in several colors and the credit goes to the mixture of several materials in random order.

Slate tile has been widely used for flooring worldwide for both residential and commercial interiors and exteriors. The tile has an amazing slip-resistance feature. When it comes to practicality and beauty, slate tile is considered to be the optimum choice. With slate, you can never slip. The preparation of this tile consists of various stages. Gauge and calibration are two main processes involved in the preparation of slate tile. Gauge is a process that lets the edges of the slate tile to turn into square shape via precision cutting. This is a very simple process and it allows the slate tile to turn into an interlocking material. This means that the tile can be easily interlocked with other tiles. Calibration is a process that makes the back of the slate tile even with the help of machine-homing. This process is very important as it make sure that the slate tile will always lay feat during and after the installation. The process of calibration makes the tile easy to install and provides it an even walking surface.

Natural face or split-face slate tile is one of the most population choices when it comes to slate tile flooring. The split is a region where the slate has been removed from the slate bed. Hence, you can be sure of the fact that this variety of slate tile maintains the natural and uneven texture. The texture makes this type of slate tile one of the most distinctive tile. If you want slip resistant flooring for your house, this is a great option. This slate tile type possesses a tactile dimension that adds up a rich color to it.

When it comes to slate tile, you can always expect a thickness variation from tile to tile. You need to consult your local flooring professionals to get an approximate idea of slate tile thickness. The thickness of slate tile can vary in a range of 3/8″-7/16″.

Slate tile flooring is one of the best options if you want something that provides you look and slip resistance factor.